BORMEG PLASTİK

geotextil winding drainage pipe

Bormeg Plastik Drenaj Manşonu ve Drenaj Borusu Ekleri

The task of the geotextile wrap is the filtration. It allows the very thin particles (0-350 micron) in the soil to pass through the felt and evacuate with water thrown through the pipe. The particles of over 350 microns accumulate on the felt and provide a natural filtration environment. 350 microns and above particles can easily pass through the pipes and evacuated into the pipe.

Geotextile is an ideal filter that is combined with a hundred percent plastic fiber needle -needing method.

General Features:

  • Life under the ground is higher than the bare drainage pipe (over 70 years)
  • Transport and upholstery is practical.
  • It is resistant to heavy chemicals.
  • Used on sandy floors without the need for filter material.
  • Application is easy.
  • Since it is not heavy, it is very easy and simple to move, furnishing and stocking.
  • long life.
  • It is resistant to impacts, chemicals, sunlight and climatic conditions.
  • There is no possibility of fire.
  • It is strong because it is high -density polyethylene in its raw material.
  • does not block.

Usage Areas:

  • muddy, slime land in the breeding work
  • In the protection of buildings and constructions with water on the basis of the basis
  • In the banquet drainage of the roads
  • Used to remove unwanted waters in agricultural lands.
  • In the evacuation of the base water of all kinds of construction floors
  • In the drainage of sports fields,
  • Railway drainage applications
  • In mines in mines
Table>
outer diameter (mm) inner diameter (mm) Kangal diameter (mm) meter-telik area (cm²) meter-extension (cm²)
Ø100 Ø92.5 Ø700 25 0.39
Ø125 Ø115.5 Ø750 41 0.54
Ø160 Ø146 Ø1000 41 0.92
Ø200 Ø183 Ø1000 56 1.25
Table>

Additional Parts

Water Entrances
diameter hole area min Hole Dimensions number of holes in meters
100 65 5 × 1.3 375 24.3
125 105 5 × 1.3 636 41
160 165 5 × 1.3 636 41
200 260 8 × 1.3 545 56